Feed aggregator

Electrek reports: EV and battery supply chain research specialists Benchmark Mineral Intelligence reports that 2.0 million electric vehicles were sold globally in November 2025, bringing global EV sales to 18.5 million units year-to-date. That's a 21% increase compared to the same period in 2024. Europe was the clear growth leader in November, while North America continued to lag following the expiration of US EV tax credits. China, meanwhile, remains the world's largest EV market by a wide margin. Europe's EV market jumped 36% year-over-year in November 2025, with BEV sales up 35% and plug-in hybrid (PHEV) sales rising 39%. That brings Europe's total EV sales to 3.8 million units for the year so far, up 33% compared to January-November 2024... In North America, EV sales in the US did tick up month-over-month in November, following a sharp October drop after federal tax credits expired on September 30, 2025. Brands including Kia (up 30%), Hyundai (up 20%), Honda (up 11%), and Subaru (232 Solterra sales versus just 13 the month before) all saw gains, but overall volumes remain below levels when the federal tax credit was still available... [North America shows a -1% drop in EV sales from January to November 2025 vs. January to November 2024] Year-to-date, EV sales in China are up 19%, with 11.6 million units sold. One of the biggest headlines out of China is exports. BYD reported a record 131,935 EV exports in November, blowing past its previous high of around 90,000 units set in June. BYD sales in Europe have jumped more than fourfold this year to around 200,000 vehicles, doubled in Southeast Asia, and climbed by more than 50% in South America... "Overall, EV demand remains resilient, supported by expanding model ranges and sustained policy incentives worldwide," said Rho Motion data manager Charles Lester. Beyond China, Europe, and North America, the rest of the world saw a 48% spike in EV sales in 2025 vs the same 11 months in 2024, representing 1.5 million EVs sold. "The takeaway: EV demand continues to grow worldwide," the article adds, "but policy support — or the lack thereof — is increasingly shaping where this growth shows up."

Read more of this story at Slashdot.

In 1975, 23-year-old electrical engineer Steve Sasson joined Kodak. And in a new interview with the BBC, he remembers that he'd found the whole photographic process "really annoying.... I wanted to build a camera with no moving parts. Now that was just to annoy the mechanical engineers..." "You take your picture, you have to wait a long time, you have to fiddle with these chemicals. Well, you know, I was raised on Star Trek, and all the good ideas come from Star Trek. So I said what if we could just do it all electronically...?" Researchers at Bell Labs in the US had, in 1969, created a type of integrated circuit called a charge-coupled device (CCD). An electric charge could be stored on a metal-oxide semiconductor (MOS), and could be passed from one MOS to another. Its creators believed one of its applications might one day be used as part of an imaging device — though they hadn't worked out how that might happen. The CCD, nevertheless, was quickly developed. By 1974, the US microchip company Fairchild Semiconductors had built the first commercial CCD, measuring just 100 x 100 pixels — the tiny electronic samples taken of an original image. The new device's ability to capture an image was only theoretical — no-one had, as yet, tried to take an image and display it. (NASA, it turned out, was also looking at this technology, but not for consumer cameras....) The CCD circuit responded to light but could only form an image if Sasson was somehow able to attach a lens to it. He could then convert the light into digital information — a blizzard of 1s and 0s — but there was just one problem: money. "I had no money to build this thing. Nobody told me to build it, and I certainly couldn't demand any money for it," he says. "I basically stole all the parts, I was in Kodak and the apparatus division, which had a lot of parts. I stole the optical assembly from an XL movie camera downstairs in a used parts bin. I was just walking by, you see it, and you take it, you know." He was also able to source an analogue to digital converter from a $12 (about £5 in 1974) digital voltmeter, rather than spending hundreds on the part. I could manage to get all these parts without anybody really noticing," he says.... The bulky device needed a way to store the information the CCD was capturing, so Sasson used an audio cassette deck. But he also needed a way to view the image once it was saved on the magnetic tape. "We had to build a playback unit," Sasson says. "And, again, nobody asked me to do that either. So all I got to do is the reverse of what I did with the camera, and then I have to turn that digital pattern into an NTSC television signal." NTSC (National Television System Committee) was the conversion standard used by American TV sets. Sasson had to turn only 100 lines of digital code captured by the camera into the 400 lines that would form a television signal. The solution was a Motorola microprocessor, and by December 1975, the camera and its playback unit was complete, the article points out. With his colleague Jim Schueckler, Sasson had spent more than a year putting together the "increasingly bulky" device, that "looked like an oversized toaster." The camera had a shutter that would take an image at about 1/20th of a second, and — if everything worked as it should — the cassette tape would start to move as the camera transferred the stored information from its CCD [which took 23 seconds]. "It took about 23 seconds to play it back, and then about eight seconds to reconfigure it to make it look like a television signal, and send it to the TV set that I stole from another lab...." In 1978, Kodak was granted the first patent for a digital camera. It was Sasson's first invention. The patent is thought to have earned Eastman Kodak billions in licensing and infringement payments by the time they sold the rights to it, fearing bankruptcy, in 2012... As for Sasson, he never worked on anything other than the digital technology he had helped to create until he retired from Eastman Kodak in 2009. Thanks to long-time Slashdot reader sinij for sharing the article.

Read more of this story at Slashdot.

New England's last coal-fired power plant "has ceased operations three years ahead of its planned retirement date," reports the New Hampshire Bulletin. "The closure of the New Hampshire facility paves the way for its owner to press ahead with an initiative to transform the site into a clean energy complex including solar panels and battery storage systems." "The end of coal is real, and it is here," said Catherine Corkery, chapter director for Sierra Club New Hampshire. "We're really excited about the next chapter...." The closure in New Hampshire — so far undisputed by the federal government — demonstrates that prolonging operations at some facilities just doesn't make economic sense for their owners. "Coal has been incredibly challenged in the New England market for over adecade," said Dan Dolan, president of the New England Power Generators Association. Merrimack Station, a 438-megawatt power plant, came online in the1960s and provided baseload power to the New England region for decades. Gradually, though, natural gas — which is cheaper and more efficient — took over the regional market... Additionally, solar power production accelerated from 2010 on, lowering demand on the grid during the day and creating more evening peaks. Coal plants take longer to ramp up production than other sources, and are therefore less economical for these shorter bursts of demand, Dolan said. In recent years, Merrimack operated only a few weeks annually. In 2024, the plant generated just0.22% of the region's electricity. It wasn't making enough money to justify continued operations, observers said. The closure "is emblematic of the transition that has been occurring in the generation fleet in New England for many years," Dolan said. "The combination of all those factors has meant that coal facilities are no longer economic in this market." Meanwhile Los Angeles — America's second-largest city — confirmed that the last coal-fired power plant supplying its electricity stopped operations just before Thanksgiving, reports the Utah News Dispatch: Advocates from the Sierra Club highlighted in a news release that shutting down the units had no impact on customers, and questioned who should "shoulder the cost of keeping an obsolete coal facility on standby...." Before ceasing operations, the coal units had been working at low capacities for several years because the agency's users hadn't been calling on the power [said John Ward, spokesperson for Intermountain Power Agency]. The coal-powered units "had a combined capacity of around 1,800 megawatts when fully operational," notes Electrek, "and as recently as 2024, they still supplied around 11% of LA's electricity. The plant sits in Utah's Great Basin region and powered Southern California for decades." Now, for the first time, none of California's power comes from coal. There's a political hiccup with IPP, though: the Republican-controlled Utah Legislature blocked the Intermountain Power Agency from fully retiring the coal units this year, ordering that they can't be disconnected or decommissioned. But despite that mandate, no buyers have stepped forward to keep the outdated coal units online. The Los Angeles Department of Water and Power (LADWP) is transitioning to newly built, hydrogen-capable generating units at the same IPP location, part of a modernization effort called IPP Renewed. These new units currently run on natural gas, but they're designed to burn a blend of natural gas and up to 30% green hydrogen, and eventually100% green hydrogen. LADWP plans to start adding green hydrogen to the fuel mix in 2026. "With the plant now idled but legally required to remain connected, serious questions remain about who will shoulder the cost of keeping an obsolete coal facility on standby," says the Sierra Club. One of the natural gas units started commerical operations last Octoboer, with the second starting later this month, IPP spokesperson John Ward told Agency]. the Utah News Dispatch.

Read more of this story at Slashdot.

Steven J. Vaughan-Nichols files this report from Tokyo: At the invitation-only Linux Kernel Maintainers Summit here, the top Linux maintainers decided, as Jonathan Corbet, Linux kernel developer, put it, "The consensus among the assembled developers is that Rust in the kernel is no longer experimental — it is now a core part of the kernel and is here to stay. So the 'experimental' tag will be coming off." As Linux kernel maintainer Steven Rosted told me, "There was zero pushback." This has been a long time coming. This shift caps five years of sometimes-fierce debate over whether the memory-safe language belonged alongside C at the heart of the world's most widely deployed open source operating system... It all began when Alex Gaynor and Geoffrey Thomas at the 2019 Linux Security Summit said that about two-thirds of Linux kernel vulnerabilities come from memory safety issues. Rust, in theory, could avoid these by using Rust's inherently safer application programming interfaces (API)... In those early days, the plan was not to rewrite Linux in Rust; it still isn't, but to adopt it selectively where it can provide the most security benefit without destabilizing mature C code. In short, new drivers, subsystems, and helper libraries would be the first targets... Despite the fuss, more and more programs were ported to Rust. By April 2025, the Linux kernel contained about 34 million lines of C code, with only 25 thousand lines written in Rust. At the same time, more and more drivers and higher-level utilities were being written in Rust. For instance, the Debian Linux distro developers announced that going forward, Rust would be a required dependency in its foundational Advanced Package Tool (APT). This change doesn't mean everyone will need to use Rust. C is not going anywhere. Still, as several maintainers told me, they expect to see many more drivers being written in Rust. In particular, Rust looks especially attractive for "leaf" drivers (network, storage, NVMe, etc.), where the Rust-for-Linux bindings expose safe wrappers over kernel C APIs. Nevertheless, for would-be kernel and systems programmers, Rust's new status in Linux hints at a career path that blends deep understanding of C with fluency in Rust's safety guarantees. This combination may define the next generation of low-level development work.

Read more of this story at Slashdot.

Steven J. Vaughan-Nichols files this report from Tokyo: At the invitation-only Linux Kernel Maintainers Summit here, the top Linux maintainers decided, as Jonathan Corbet, Linux kernel developer, put it, "The consensus among the assembled developers is that Rust in the kernel is no longer experimental — it is now a core part of the kernel and is here to stay. So the 'experimental' tag will be coming off." As Linux kernel maintainer Steven Rosted told me, "There was zero pushback." This has been a long time coming. This shift caps five years of sometimes-fierce debate over whether the memory-safe language belonged alongside C at the heart of the world's most widely deployed open source operating system... It all began when Alex Gaynor and Geoffrey Thomas at the 2019 Linux Security Summit said that about two-thirds of Linux kernel vulnerabilities come from memory safety issues. Rust, in theory, could avoid these by using Rust's inherently safer application programming interfaces (API)... In those early days, the plan was not to rewrite Linux in Rust; it still isn't, but to adopt it selectively where it can provide the most security benefit without destabilizing mature C code. In short, new drivers, subsystems, and helper libraries would be the first targets... Despite the fuss, more and more programs were ported to Rust. By April 2025, the Linux kernel contained about 34 million lines of C code, with only 25 thousand lines written in Rust. At the same time, more and more drivers and higher-level utilities were being written in Rust. For instance, the Debian Linux distro developers announced that going forward, Rust would be a required dependency in its foundational Advanced Package Tool (APT). This change doesn't mean everyone will need to use Rust. C is not going anywhere. Still, as several maintainers told me, they expect to see many more drivers being written in Rust. In particular, Rust looks especially attractive for "leaf" drivers (network, storage, NVMe, etc.), where the Rust-for-Linux bindings expose safe wrappers over kernel C APIs. Nevertheless, for would-be kernel and systems programmers, Rust's new status in Linux hints at a career path that blends deep understanding of C with fluency in Rust's safety guarantees. This combination may define the next generation of low-level development work.

Read more of this story at Slashdot.

Nakst Integrate: virtual analog Synthesizer plugin for mac, Linux and Windows is now FREE  synth anatomy

New RTC Drivers For Apple & NVIDIA With Linux 6.19  Phoronix

COSMIC's big release, the new Kali Linux, and more: Linux news roundup  How-To Geek

LoongArch32 Support Begins Taking Shape In Linux 6.19, GCC 16  Phoronix

Wow! After years of hard work and countless commits, we have finally reached a huge milestone: GIMP 3.0 is officially released! I am excited as I write this and can't wait to share some incredible new features and improvements in this release. GIMP 2.10 was released in 2018, and the first development version of GIMP 3.0 came out in 2020. GIMP 3.0 released on 16/March/2025. Let us explore how to download and install GIMP 3.0, as well as the new features in this version. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post Download of the day: GIMP 3.0 is FINALLY Here! appeared first on nixCraft. 2025-03-18T03:45:26Z 2025-03-18T03:45:26Z Vivek Gite

Here is a quick list of all upgradeable packages on FreeBSD using pkg command. This is equivalent to apt list --upgradable command on my Debian or Ubuntu Linux system. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post How to list upgradeable packages on FreeBSD using pkg appeared first on nixCraft. 2025-03-16T20:25:39Z 2025-03-16T20:25:39Z Vivek Gite

In a move that has sparked significant discussion within the Ubuntu Linux fan-base and community, Canonical, the company behind Ubuntu, has announced its intention to explore the potential replacement of GNU Core Utilities with the Rust-based "uutils" project. They plan to introduce new changes in Ubuntu Linux 25.10, eventually changing it to Ubuntu version 26.04 LTS release in 2026 as Ubuntu is testing Rust 'uutils' to overhaul its core utilities potentially. Let us find out the pros and cons and what this means for you as an Ubuntu Linux user, IT pro, or developer. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post Ubuntu to Explore Rust-Based “uutils” as Potential GNU Core Utilities Replacement appeared first on nixCraft. 2025-03-16T12:17:36Z 2025-03-16T12:17:36Z Vivek Gite

Installing KSH (KornShell) on FreeBSD can be done with either FreeBSD ports or the pkg command. The ports collection will download the KSH source code, compile it, and install it on the system. The pkg method is easier, and it will download a pre-compiled binary package. Hence, it is recommended for all users. KornShell (KSH) has a long history, and many older Unix systems and scripts rely on it. As a result, KSH remains relevant for maintaining and supporting legacy infrastructure. Large enterprises, especially those with established Unix-based systems, continue to use KSH for scripting and system administration tasks. Some industries where KSH is still commonly used include finance and telecommunications. While Bash has become the dominant shell in many Linux distributions, KSH still holds a significant presence in Unix-like environments, particularly in legacy systems. Therefore, installing KSH and practicing with it is worthwhile if you plan to work in such environments. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post How to install KSH on FreeBSD appeared first on nixCraft. 2025-03-03T23:50:59Z 2025-03-03T23:50:59Z Vivek Gite

Sed is an acronym for "stream editor." A stream refers to a source or destination for bytes. In other words, sed can read its input from standard input (stdin), apply the specified edits to the stream, and automatically output the results to standard output (stdout). Sed syntax allows an input file to be specified on the command line. However, the syntax does not directly support output file specification; this can be achieved through output redirection or editing files in place while making a backup of the original copy optionally. Sed is one of the most powerful tools on Linux and Unix-like systems. Learning it is worthwhile, so in this tutorial, we will start with the sed command syntax and examples. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post Linux Sed Tutorial: Learn Text Editing with Syntax & Examples appeared first on nixCraft. 2025-03-03T09:47:07Z 2025-03-03T09:47:07Z Vivek Gite

Keeping your FreeBSD server or workstation updated is crucial for security and stability. However, after applying updates, especially kernel updates, you might wonder, "Do I need to reboot my system?" Let's simplify this process and provide a straightforward method for determining whether a reboot is necessary using the CLI, shell script, and ansible playbook. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post How to tell if FreeBSD needs a Reboot using kernel version check appeared first on nixCraft. 2025-02-23T22:07:23Z 2025-02-23T22:07:23Z Vivek Gite

Rsync is a opensource command-line tool in Linux, macOS, *BSD and Unix-like systems that synchronizes files and directories. It is a popular tool for sending or receiving files, making backups, or setting up mirrors. It minimizes data copied by transferring only the changed parts of files, making it faster and more bandwidth-efficient than traditional copying methods provided by tools like sftp or ftp-ssl. Rsync versions 3.3.0 and below has been found with SIX serious vulnerabilities. Attackers could exploit these to leak your data, corrupt your files, or even take over your system. There is a heap-based buffer overflow with a CVSS score of 9.8 that needs to be addressed on both the client and server sides of rsync package. Apart from that info leak via uninitialized stack contents defeats ASLR protection and rsync server can make client write files outside of destination directory using symbolic links. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post Critical Rsync Vulnerability Requires Immediate Patching on Linux and Unix systems appeared first on nixCraft. 2025-01-15T18:04:24Z 2025-01-15T18:04:24Z Vivek Gite

Multiplexing will boost your SSH connectivity or speed by reusing existing TCP connections to a remote host. This is useful when you frequently connect to the same server using SSH protocol for remote login, server management, using IT automation tools over SSH or even running hourly backups. However, sometimes your SSH command (client) will not respond or get hung up on the session when using multiplexing. Typically, this happens when your public IP changes (IPv4 to IPv6 changes when using DNS names), VPN issues, or firewall cuts connections. Hence, knowing SSH client control commands can save you time and boost your productivity when such gotchas occur. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post How to control the SSH multiplexing with the control commands appeared first on nixCraft. 2025-01-15T08:29:10Z 2025-01-15T08:29:10Z Vivek Gite

After years of development and testing, the ZFS raidz expansion is finally here and has been released as part of version 2.3.0. ZFS is a popular file system for Linux and FreeBSD. RAIDz is like RAID 5, which you find with hardware or Linux software raid devices. It protects your data by spreading it across multiple hard disks along with parity information. A raidz device can have single, double, or triple parity to sustain one, two, or three hard disk failures, respectively, without losing any data. Hence, expanding or adding a new HDD is a very handy feature for sysadmins in today's data-sensitive apps. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post ZFS Raidz Expansion Finally, Here in version 2.3.0 appeared first on nixCraft. 2025-01-14T09:19:20Z 2025-01-14T09:19:20Z Vivek Gite

Incus and Docker both use Linux kernel features to containerize your applications. Incus is best suited when you need system-level containers that act like traditional VMs and provide a persistent developer experience. On the other hand, Docker containers are ephemeral, i.e., temporary in nature. All files created inside Docker containers are lost when your Docker container is stopped or removed unless you stored them using volumes in different directories outside Docker. Docker is created as a disposable app deployment system. Incus containers are not typically created as disposables, and data is kept inside when they are stopped. Because of the Linux kernel support nesting feature, you can run Docker inside Incus. This page explains how to run Docker inside Incus containers. Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post How to run Docker inside Incus containers appeared first on nixCraft. 2024-12-18T05:44:26Z 2024-12-18T05:44:26Z Vivek Gite

How do I change MySQL root password under Linux, FreeBSD, OpenBSD and UNIX-like like operating system over the ssh session? Love this? sudo share_on: Twitter - Facebook - LinkedIn - Whatsapp - Reddit The post MySQL Change root Password Command appeared first on nixCraft. 2024-12-09T16:19:00Z 2024-12-09T16:19:00Z Vivek Gite